In My Stamp Room

Count Down to Valentines Day, Day 10

Today is the last day of this series, I hope you have enjoyed these cards, and that they help you to create one of a kind valentines for all your friends and loved ones.  You can find the supplies for all these cards on Day 1.

Card #10

1.  cut a 3 1/4x2 1/2 Piece of Very vanilla
2. Stamp Love on the very vanilla
3. Cut a 1x2 3/4” strip of striped DSP and mount it on the inside of the card. 
4. attach a brad to the flower, and the button on the O
5. wrap and tie bashful blue taffeta ribbon around the vanilla piece and adhere to the card.

And here is a photo of all the cards together, I hope you enjoyed this series!

Happy Stamping!

Count Down to Valentines Day, Day 9

1 more day of this little series.  You can find the supplies for these cards on day 1 of this series.

Card #9

1. cut a 3 1/4x2 1/2 Piece of Very vanilla
2. Mount a 1 1/2x2 1/2” Piece of dsp on the right side.
3. stamp the birds on the left side
4. Stamp the 3 hearts stamp onto Baja Breeze, Chocolate Chip and Pink Pirouette Cardstock and Punch each of those out with the Heart to Heart Punch, adhere to the card
5. Stamp friend to friend on a scrap piece of very vanilla, punch out with the word window punch, words over the left of the punch,
6. mount this on the card, adhere the small button with a glue dot to the right side of the word window punch.

Count Down to Valentines Day, Day 8

5 more days till Valentines Day!  Are you all ready?  Dinner plans? A night out with friends maybe? well what ever it is, I hope you enjoy your day!  You can find the supplies for the cards on Day 1 of this series.

Card #8

1.  stamp happy valentines day on the edge of the card that sticks out past the scallops.
2. cut a 3 1/4x2 1/2 Piece of dsp
3. stamp the butterfly and the love you trail on the corner of the dsp,
4. stamp and punch out the heart to heart stamp on chocolate chip and baja breeze twice
5. adhere the larger hearts as wings on the butterfly
6. wrap chocolate chip taffeta around the dsp and tie with the button
7. adhere it to the card base
8. stamp happy valentines day on the edge of the card that sticks out past the scallops.

Count Down to Valentines Day, Day 7

Hope your week is swell!  You can find the supplies for these cards on Day 1.

Card #7

1. stamp the trio of small hearts on the edge of the card that sticks out past the scallops.
2. cut a 1 3/4x2 3/4” piece of dsp, and a piece of ribbon
3. adhere the ribbon on the back of the dsp about 2/3 of the way down, wrap it around the front of the dsp and then adhere this to the card base.
4. stamp and punch out the scallop circle
5. Punch out a 3/4” Circle of chocolate chip and adhere this to the center of the scallop circle
6. Using a glue dot, adhere the button to the middle of the chocolate chip circle, adhere this to the card.

CPS Sketch 102

This weeks CPS Sketch is very cute, so I thought I would give it a go.  Honestly I am going to start to do more challenges and things from other sites, and do more stamping for me, or for the fun of it.  I need more of that!!

Here is my take on this weeks sketch...

Supplies:

113620 - Always stamp set
111351 - Pink Pirouette card stock
102128 - Chocolate Chip card stock
105117 - Pumpkin Pie card stock
105130 - Regal Rose card stock
112468 - Sweet Always DSP
100908 - Chocolate Chip classic ink
105211 - Regal Rose classic ink
112579 - Flower Designer Brads
109030 - Pumpkin Pie grosgrain ribbon
113692 - Eyelet Border punch
109047 - 3/16" Corner Rounder punch
105021 - White Gel Pen
113462 - Stampin' Up! Scallop Envelope Die
102283 - Versamark
109132 - White embossing powder
100005 - Heat Tool

Second Post Today - Magazine Holders

So, I have the Serif Essentials Alphabet (A Big Shot Die Set of 7 on page 196) on its way to my house.  And when Mr. Brown Drops it off, I plan to play with it of course, but it got me thinking as to what I would do with all the extra letters that I would probably cut out if i used a full quarter sheet of card stock when i die cut the letter I need, as there are 4 letters per die, This set also comes with a question mark, an exclamation mark, a comma, and an ampersand.  I also knew a while back that I had seen some awesome Magazine Holder Style boxes for card storage, and I thought it would be a great way to store my extra letters.

And now, on with the show!

I had to cut the cellophane bags down a little to make them not stick out so much from the tops of the holders.  I sure do love the Rockabilly Specialty paper with its glossy texture!

Supplies:

102757 - Medium Flat Cello Bags
106532 - Basic Black 12x12 card stock
114039 - Rockabilly Specialty paper
111345 - Kiwi Kiss Textured card stock
112454 - Styled Vanilla Hodgepodge Hardware
104294 - Sticky Strip
107590 - Designer Label Punch
108340 - Round Tab Punch

Count Down to Valentines Day, Day 6

Day 6 is here!  Hope you are enjoying this little series of cards.  You can find the supplies for these cards on Day 1!

Card #6

1. Stamp the flower with the heart in the middle of it from happy heart day on the card 3 times.
2. Using the marker, color only the butterfly from happy heart day and stamp it on the card
3. using the fine tip of the marker draw stems and a trail from the butterfly.
4. cut a 3 1/4x1” strip of dsp and rip it to create ground and adhere to the card.
5. punch out 2 small hearts, and adhere to the card.
6. using a glue dot adhere the button to one of the flowers.
7. stamp happy valentines day on the edge of the card that sticks out past the scallops.

Count Down to Valentines Day, Day 5

Half way done the count to Valentines day!  You can find the supplies to all the cards in the series on Day 1. 

Card #5

1. cut a 3 1/4x2 1/2” Piece of Very Vanilla
2. Stamp the branch on the cardstock closer to the bottom
3. stamp the birds so their feet at on the branches
4. stamp the trio of little hearts above the birds.
5. stamp and punch out 6 of the smallest hearts in the heart to heart punch and arrange on the card.
6. using a glue dot adhere the button in the middle of all the leaves on the branch
7. stamp happy valentines day on the edge of the card that sticks out past the scallops.

Count Down to Valentines Day, Day 4

Love is in the air, only 9 days till valentines day!  You can find the supply list for these cards on Day 1!

Card #4

1. Using the chocolate chip marker  on the Love stamp, color in onlu the V vase and flower, stamp that on 1 1/2x2 1/2” piece of very vanilla,
2. cut a 1 3/4x2 1/2” Piece of dsp,
3. wrap some ribbon around the dsp and using a glue dot and 2 smaller pieces of ribbon make a bow. Adhere to ribbon that is in the dsp.
4. adhere the dsp to the card.
5. stamp friend to friend and punch out with the word window and adhere to the card.
6. using a glue do, adhere the flower button where the flower is in the vase.

Count Down to Valentines Day, Day 3

Day 3 is here!  You can find the supplies for all the projects in this series on Day 1!

Happy Stamping!

Card #3

1. Stamp and cut out the large Heart on DSP
2. stamp and punch out the scallop image on very vanilla, punch out the 1 1/4” Circle in baja breeze and the 1” Circle in the pink pirouette.  
3. Mount these three layers together
4. Stamp the front of the card base with the 3 hearts stamp.
5. tie a bit of gingham ribbon in the holes of the large button, and using a glue dot adhere it to the large heart